Bissell 88D6 Vacuum Cleaner User Manual


 
Front view
Clean/solution tank
Located to the right of the unit when you are
facing the unit. Holds the clean water and
formula.
Automatic Smart System control paneI
Located in the center of the unit. This is
where you will begin selection of the smart
cleaning cycle you would like to use
(detailed instructions on page 8).
Dirty/collection tank
Located to the left of the unit when you are
facing the unit. Holds the dirty water that is
suctioned up.
Vacuum flex hose
Wraps around the center of the unit. Serves
as the travel path for dirty water that is
suctioned up into the dirty/collection tank.
Flex hose clip
Located on the end of the unit near the
clean/solution tank. It is a guide for wrapping
the vacuum flex hose.
Tough Stain Brush
Attach to the end of the hose for cleaning in
manual mode or store in the storage area for
handsfree cleaning.
Spray trigger
When cleaning in the manual mode, press
the spray trigger to release water and
formula onto the area to be cleaned.
Underside view
Handsfree cleaning brushes
Provides cleaning action when using the surface
stain or set-in handsfree cleaning cycles.
Spray tip
Water and formula are dispensed here when
cleaning in the handsfree mode.
Vacuum suction nozzles
Provides a suction path for the dirty water
when using the handsfree cleaning cycles.
Special features
6
w ww.b is se ll .c om