Filter
Top Products
5
www.bissell.com 800.237.7691
This user’s guide has been designed to help
you get the maximum satisfaction from your
PROdry carpet cleaner. You’ll find assembly
and operating instructions, safety precautions,
as well as maintenance and troubleshooting
instructions. Please read this user’s guide
thoroughly before assembling your carpet
cleaner.
Your carpet cleaner comes in three easy to
assemble components:
• Handleassembly
• Upperhosewrap
• Lowerbodyassembly
Four Phillips head screws are included and can
be found taped to the handle assembly.
The only tool you will need to assemble your
PROdry is a Phillips head screwdriver.
1. Slide upper handle into lower body assembly
and secure with 2 screws.
2. Attach upper hose wrap using 2 screws.
3. Wrap hose clockwise around the upper and
lower hose wraps as shown on page 4. Be
sure to properly secure grip into the notched
holder.
4. Keep hose locked in place with the
secure latch.
5. Wrap the power cord as shown on page 4.
6. Place tough stain tool and 2-in-1 crevice tool
in the center tool caddy.
How to use this guide
Assembly
WARNING:
Do not plug in your cleaner
until you have completely
assembled it per the
following instructions
and are familiar with all
instructions and operating
procedures.
1.
2a.
2b.
Tip: Regular carpet cleaning
can reduce dust and allergens in
your home.
Upper Hose
Wrap Screws
Upper Handle
Screws
ug120-4080_7350_908.indd 5 10/14/08 1:25:57 PM