Filter
Top Products
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
9
Troubleshooting
Vacuum cleaner won’t turn on
Possible causes Remedies
1. Power cord not plugged in 1. Check electrical plug
2. Blown fuse/tripped breaker 2. Check/replace fuse or reset breaker
Vacuum cleaner has low suction
Possible causes Remedies
1. Dirt container is full 1. Empty dirt container
2. Dirt container is not installed properly 2. Position container correctly and snap firmly into place
3. Separator grill is not installed properly 3. Position separator grill in upper tank and twist firmly into
place
4. Clog in vacuum 4. Follow instructions on page 8 to clear clog
5. Separator grill is clogged with debris 5. Remove and wipe separator grill of all debris
6. Foot is loose 6. Make sure foot is fully inserted into body of unit
7. Filters need replacing 7. Visit www.bissell.com or call 1-800-237-7691 to order
replacement filters.
Visible dirt escaping from vacuum
Possible causes Remedies
1. Dirt container is full of debris 1. Empty dirt container
2. Filter is missing or installed incorrectly 2. Check filter for correct installation
3. Dirt container installed incorrectly 3. Position container correctly and snap firmly into place
4. Separator grill is missing or installed incorrectly 4. Position separator grill in upper tank and twist firmly
into place
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store.
For any questions or concerns, BISSELL is happy to be of
service. Contact us directly at 1-800-237-7691.
WARNING:
To reduce the risk of electric
shock, turn power OFF and
disconnect polarized plug from
electrical outlet before performing
maintenance or troubleshooting.