Filter
Top Products
3
IMPORTANT SAFETY INSTRUCTIONS
■
Keep openings free of dust, lint, hair, etc.
■
Do not point attachment nozzle at people
or animals
■
Keep appliance on a level surface.
■
Turn off all controls before unplugging.
■
Unplug before attaching the TurboBrush.
®
■
Be extra careful when cleaning stairs.
■
Close attention is necessary when used by or near
children.
■
WARNING: The Power Cord on this product
contains lead, a chemical known to the State of
California to cause birth defects or other
reproductive harm.
WASH HANDS AFTER HANDLING.
SAVE THESE INSTRUCTIONS.
THIS MODEL IS FOR HOUSEHOLD USE ONLY.
Commercial use of this unit voids the
manufacturer’s warranty
.
GROUNDING INSTRUCTIONS
This appliance must be connected to a grounded wiring
system. If it should malfunction or break down, grounding
provides a safe path of least resistance for electrical
current, reducing the risk of electrical shock. The cord for
this appliance has an equipment-grounding conductor
and a grounding plug. It must only be plugged into
an outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
WARNING: Improper connection
of the equipment-grounding conductor can
result in a risk of electrical shock. Check
with a qualified electrician or service
person if you aren’t sure if the outlet is
properly grounded. DO NOT MODIFY THE
PLUG. If it will not fit the outlet, have a
proper outlet installed by a qualified
electrician. This appliance is designed for
use on a nominal 120-volt circuit, and has
a grounding attachment plug that looks
like the plug in the drawing above. Make
certain that the appliance is connected to
an outlet having the same configuration as
the plug. No plug adapter should be used
with this appliance.
Grounded
Outlets
Grounding Pin
When using an electrical
appliance, basic
precautions should be observed, including
the following:
Read all instructions before using your
ProHeat
®
WARNING:
To reduce the risk of
fire, electric shock, or injury:
■
Do not immerse.
■
Use only on surfaces moistened by
cleaning process.
■
Always connect to a properly grounded outlet.
■
See Grounding Instructions.
■
Unplug from outlet when not in use and before
conducting maintenance or troubleshooting.
■
Do not leave machine when it is plugged in.
■
Do not service machine when it is plugged in.
■
Do not use with damaged cord or plug.
■
If appliance is not working as it should, has
been dropped, damaged, left outdoors, or
dropped into water, have it repaired at an
authorized Service Center.
■
Use indoors only.
■
Do not pull or carry by cord, use cord as a handle,
close door on cord, pull cord around sharp corners
or edges, run appliance over cord, or expose cord to
heated surfaces.
■
Do not carry the appliance while in use.
■
Do not unplug by pulling on cord. Unplug by
grasping the plug, not the cord.
■
Do not handle plug or appliance with wet hands.
■
Do not put any object into appliance openings, use with
blocked opening, or restrict air flow.
■
Do not expose hair, loose clothing, fingers or
body parts to openings or moving parts.
■
Do not pick up hot or burning objects.
■
Do not pick up flammable or combustible materials
(lighter fluid, gasoline, kerosene, etc.) or use in the
presence of explosive liquids or vapor.
■
Do not use appliance in an enclosed space filled with
vapors given off by oil base paint, paint thinner, some moth
proofing substances, flammable dust, or other explosive or
toxic vapors.
■
Do not pick up toxic material (chlorine bleach,
ammonia, drain cleaner, gasoline, etc.).
■
Do not modify the 3-prong grounded plug.
■
Do not allow to be used as a toy.
■
Do not use for any purpose other than described
in this User’s Guide.
■
Do not operate the appliance unless the belt door is
securely assembled in the location provided.
■
Use only manufacturer’s recommended attachments.
■
To reduce the risk of fire and electric shock
due to internal component damage, use only
cleaning products formulated by BISSELL for
use in this appliance. See the Cleaning Fluid
section of this manual.
ug310-5861_7950_205.indd 3ug310-5861_7950_205.indd 3 3/11/05 8:31:11 AM3/11/05 8:31:11 AM