Filter
Top Products
19
To Install the Replacement Pump Belt
With the unit still on its side, loop one end of the replacement
pump belt around the red pump pulley and then the other end
around the silver motor shaft. Do not twist the replacement
pump belt.
Re-install the toothed brush belt first onto the red pump pulley
and then onto the toothed end of the brush.
Re-Install the brush into the base of unit.
Place the black brush arm onto the brush and slide black
brush arm into base of unit. The black brush arm and brush
should slide easily into original position.
Re-install the red retainer plate and Phillips head screw.
Using your finger, gently spin the replacement pump belt
on the silver motor shaft. If assembled correctly, the
replacement pump belt should rotate freely around the
silver motor shaft and drive pulley without obstruction. The
brush should also rotate freely when the silver motor shaft is
turned.
Turn the machine right side up and replace the Tank-In-Tank,
SmartMix Tank and belt access door.
Assembly is now complete.
If you have any questions, or are having trouble installing
your replacement pump belt, please call BISSELL Consumer
Services at 1-800-237-7691.
1.
2.
3.
4.
5.
6.
7.
8.
1
2
4
5
7b
6
7a
ug310-5861_7950_205.indd 19ug310-5861_7950_205.indd 19 3/11/05 8:31:27 AM3/11/05 8:31:27 AM