Bissell 73A5 Vacuum Cleaner User Manual


 
11
w ww.b is se ll .c a 1 -8 00 -2 63 -2 53 5
Operation
Carpet cleaning (continued)
1. Remove formula tank from back of machine.
2. Fill the formula tank by first unscrew-
ing the cap and insert. Always use genuine
BISSELL formulas to maximize cleaning and
for the safety of your machine. Fill water up to
water line, and then fill up to formula line with
BISSELL 2X concentrated formula. Replace the
cap and insert. Place formula tank into the slot
in the back of the machine for a snug fit.
3. Set Custom Clean Dial. Simply choose one
of the 4 settings (heavy traffic, normal clean,
light clean, or water rinse) and the ProHeat
2X will adjust the right amount of cleaning
solution to mix with the heated water to fit
your cleaning need.
4. Set ReadyTools Dial to the floor cleaning setting.
5. Plug into a proper outlet and turn the power
and heater switches to the ON ( I ) position. Allow
1 minute for the built-in heater to warm-up before
cleaning. The ProHeat 2X will be fully warmed and
will provide optimal performance after a minute of
continuous heated cleaning.
6. Cleaning Strokes. While pressing the trigger,
make one slow forward wet pass and another
one back. Let the built-in heater, formula, and
DirtLifter PowerBrushes do the work for you.
Caution: Do not overwet. Take care not to run
over loose objects or edges of area rugs. Stalling
brush may result in premature belt failure.
Note: Your machine is equipped with a
circuit breaker that will automatically shut
off the brush if a large or loose object is
caught in the brush roll. If that happens, be
sure to unplug your machine, remove the
foreign object, and then plug the machine
back in to reset the circuit breaker.
Release the trigger and make one slow
forward and backward pass over the same
area to remove any residual dirty water and
aid in drying. Repeat cleaning passes until
solution being pulled up appears clean.
Continue passes without pressing the trigger
until you can’t see any more water
being pulled up.
FLOOR
CLEANING
1. 2a.
4.
R
I
N
S
E
W
A
T
E
R
3.
Power Switch
Heater Switch
Power Switch
Power Switch
5.
Keep plenty of genuine BISSELL 2X
Multi-Allergen Removal Formula on
hand so you can clean whenever it fits
your schedule. Always use genuine
BISSELL deep cleaning formulas. Non-
BISSELL cleaning solutions may harm
the machine and void the warranty.
WARNING:
To reduce the risk of fire and
electric shock due to internal
component damage, use only
BISSELL cleaning fluids intended
for use with the deep cleaner.