Filter
Top Products
www.bissell.com 800.237.7691
Operations
8
Maintenance and care
Empty Dirt Container
Empty when dirt reaches the “Full”
line on the container.
1. Turn power OFF. Unplug power cord
from electrical outlet.
2. Slide Lock ‘n Seal lever to “Unlock” position.
3. Grasp dirt cup handle portion and pull straight
out to remove from vacuum and empty.
4. Place dirt container back in the vacuum
and slide lever to lock position.
NOTE: The dirt container may be
washed in warm water with mild
detergent by hand. Do not put the
dirt container or any product
component in the dishwasher.
Make sure the dirt container is
completely dry before replacing.
1. Turn power OFF. Unplug vacuum cord
from electrical outlet.
2. Remove dirt container. Grasp the filter
located at the bottom of the dirt con-
tainer, lift and pull straight out.
DO NOT PULL CIRCULAR FOAM
FILTER OUT OF THE FILTER CUP
WHILE IT IS STILL IN THE VACUUM.
3. Grasp the plastic tab on the top of the circu-
lar foam filters; twist to unlock and pull out.
Full Line
Lock Position
Unlock Position
3.
Cleaning the inner & outer circular filter
2.
3.