Filter
Top Products
www.bissell.com 800.237.7691
Operations
6
Automatic cord rewind
1. Gently pull out power cord and stop
when yellow line is visible. Do not pull
power cord beyond the red line. Plug
cord into electrical outlet.
2. To return cord, turn vacuum power switch
OFF, and remove plug from outlet. Hold
plug and press automatic cord button to
wind cord into reel. Do not allow plug to
whip when rewinding.
Power switch
The power switch is located just below the
handle on the side of the vacuum.
I -ON O- OFF
Handle position
Press the handle release pedal with
foot to place vacuum into cleaning
positions.
1.
Upright: For storage, transporting, and above
floor cleaning with tools.
•Transportinuprightpositionbytiltingvacuum
on rear wheels and push forward or use
carrying handle on back of handle base.
2. Normal cleaning: Press handle release
pedal once for most household floor cleaning.
3. Low cleaning: From normal cleaning
position, press handle release pedal once for
cleaning under low furniture.
Height adjustments
Turn dial on powerfoot to adjust to
one of five height adjustments. If dial
is difficult to turn, tilt the cleaner back
slightly to take the weight off the foot
while turning.
Lowest Setting: For low pile carpet and
barefloors.
Medium Setting: For medium pile carpet.
Highest Setting: For high pile and most
shag carpet. Adjust to high
setting if difficult to push.