Filter
Top Products
www.bissell.com 800.237.7691
9
Operations
Maintenance and care
Tip:
Vacuuming new carpet
or fine powders may
clog the vacuum bag. If
you notice a reduction
in suction or pickup,
check and replace the
vacuum bag, if neces-
sary, to restore maxi-
mum performance.
WARNING:
To reduce the risk of electric
shock, turn power switch OFF
and disconnect polarized plug
from electrical outlet before
performing maintenance or
troubleshooting checks.
CAUTION:
To reduce the risk of injury from
moving parts, turn off vacuum
cleaner and disconnect plug
from electrical outlet.
Power cord storage
When you have finished using your BISSELL
Velocity Bagged vacuum, return it to the
upright position and store the power cord.
1. Turn vacuum cleaner off.
2. Unplug power cord by grasping the
polarized plug (NOT the cord) and
disconnect from outlet.
3. Loop power cord around cord wraps
on side of vacuum cleaner.
4. Clip molded plug to power cord
to secure.
To maintain maximum cleaning performance,
the following maintenance steps must
be performed:
Replace Vacuum Bag
Never reuse a vacuum bag. Use only BISSELL
Vacuum Bag Model 3267 in your BISSELL
Velocity Bagged vacuum.
1. Unplug the vacuum cleaner from the
electrical outlet.
2. Remove the Bag Tank and detach the
tank lid.
3. Remove the used vacuum bag from the
Bag Tank and dispose.
4. Using a new vacuum bag, align the bag
opening with the tank lid inlet and attach
the cardboard bag collar to the tank lid.
5. Attach the tank lid to the tank and reinsert
the tank into the vacuum cleaner. Slide
the Lock 'n Seal lever into the "Lock"
position to secure the Bag Tank in place.
NOTE: Do not operate vacuum
cleaner without a vacuum bag.
5.
4.2.