Filter
Top Products
16
w ww.b is se ll .c om
15
Changing the light bulb
1. Turn power button off.
2. Unplug vacuum from electrical outlet.
3. Recline handle for easier access to light
bulb. Remove 2 screws to lift off lens.
4. Remove the bulb by grasping bulb and
pulling straight out of the socket. Install the
new bulb by pushing gently into the socket
until the bulb snaps into place.
5. Replace the lens back into the vacuum and
secure with two screws.
TurboBrush maintenance
The TurboBrush should be checked regularly for
clogs or debris wrapping around the brush.
1. Remove from hose or front of vacuum.
2. Twist collar so opening is at the top and lift
top cover to remove.
3. Remove the brush from the belt and clean
debris.
4. Replace the brush inside the belt and place
ends into slots on sides as shown.
5. Reposition top cover making sure to line up
inside tab at the front with the opening on
the cover. Twist collar until opening is at the
bottom to lock into place.
Maintenance and care
2
4
3
5
2
Inside Tab