Filter
Top Products
www.bissell.com 800.237.7691
13
Maintenance and Care
3.
Maintaining the Pet TurboEraser
Tool and TurboBrush Tool
The Pet TurboEraser Tool should be checked
regularly for clogs and debris wrapping
around the paddles. Select models include
a TurboBrush Tool that follows the same
maintenance instructions.
1. Unplug unit from outlet.
2. Remove tool from hose or vacuum.
3. If clog is present or debris is visible,
unscrew the two screws on the back of
the Pet TurboEraser Tool to remove the
faceplate and clear any obstructions.
4. To clean debris remove the paddles from
the drive belt and clean debris.
5. Reposition the drive belt on the paddle
roll. Place ends of roll in the slots on sides
as shown. Reposition faceplate and secure
with two screws.
NOTE: The Pet TurboEraser Tool is
designed to remove pet hair from
upholstered or carpeted surfaces.
It should not be used on pets.