Filter
Top Products
www.bissell.com 800.237.7691
Maintenance and Care
10
WARNING:
To reduce the risk of electric
shock, turn power switch OFF
and disconnect polarized
plug from electrical outlet before
performing maintenance or
troubleshooting checks.
inner
cyclone
To maximize your cleaning performance
and extend the life of your vacuum, it is
very important that you empty your dirt
container and check and clean your filters
frequently. Follow the instructions on the
following pages, and perform these simple
maintenance steps:
1. Empty the dirt container when the dirt
reaches the “Full” line on the container,
or more frequently, to prevent overfills.
2. Check the pre-motor and post-motor
filter regularly. Clean or replace
as needed.
NOTE: Use of moist parts/compo-
nents in your unit will damage the
motor and void your warranty
3. Use the hose alone or attach any tool
by firmly pushing onto the vacuum hose,
hose wand, or extension wand. They
are a friction fit, so be sure the hose
and tool fit snuggly together.
NOTE: Be sure to clean or replace
your filters anytime the clean filter
indicator begins to turn red.
NOTE: More frequent filter cleaning
may be necessary if you are
vacuuming new carpet, fine dust,
or have allergy concerns.
Cleaning the dirt container
1. Ensure that the dirt cup has been emptied.
2 While the dirt cup is still out of the
unit,grasp the inner cyclone screen and
twist to the right until the locking tab
stops the rotation. Pull down the inner
cyclone screen to remove it.
3 Clean the inner cyclone with a cloth or
soft brush to remove dust or debris.
4. Wipe out the inside of the upper tank
and the inner cyclone with a damp
cloth moistened with water or a mild
cleaning detergent.
Tip:
For maximum cleaning perfor-
mance, check and clean or replace
all filters as suggested