Filter
Top Products
11
w ww.b is se ll .c a 1 -8 00 -2 63 -2 53 5
Maintenance and care
The post-motor HEPA media filter assists in
the filtration process to return clean air to
the room.
1. Unplug the vacuum from electrical outlet.
2. Remove the filter door (located on the rear of
the vacuum) by pulling up on the filter door
latch.
3. Remove the post-motor HEPA media filter by
grasping the lip of the filter frame and
pulling up.
4. Replace the post-motor HEPA media filter
with a new filter.
NOTE: The post-motor filter is a white,
pleated HEPA media filter. This filter is NOT
washable and must be replaced when it
becomes dirty.
NOTE: The HEPA media filter should not be
touched, when handling be sure to only
touch the frame.
5 . Replace the filter door by inserting the two
tabs at the top of the filter door and pushing
down on the bottom of the filter door.
Replacing the post-motor HEPA media filter
Post-Motor
HEPA Media Filter
3.
4.