Filter
Top Products
7
Your BISSELL CleanView is not only a powerful carpet and rug
vacuum cleaner, it’s also a versatile above floor vacuum cleaner
when you select one of the special tools.
Raise Handle to Upright Position.
Grasp the Quick Reach Handle and lift Hose Wand to
separate from suction intake opening.
Attach tools by firmly pushing onto Vacuum Hose
or Extension Wand.
Dusting Brush Tool:
Use to dust furniture, blinds, books, lamps, shelves,
draperies, cushions.
Crevice Tool:
Use in tight narrow spaces.
Extension Wand:
Use with desired attachment for a longer reach.
When you are done using your BISSELL CleanView, return it to the
Upright position and store the Power Cord.
Turn vacuum cleaner off.
Unplug Power Cord by grasping the plug (NOT the cord)
and disconnect from outlet.
Loop Power Cord around Cord Wraps on side of
vacuum cleaner.
Clip molded plug to Power Cord to secure.
To maintain maximum cleaning performance, the following
maintenance steps must be performed:
Empty the Dirt Container when the dirt reaches the “Full”
line on the side.
Check the Upper Tank and Pre-Motor Filters monthly and
clean or replace as needed.
Clean or replace the Post-Motor Filter every
three months.
Note: More frequent filter cleaning may be
necessary if you are vacuuming new carpet, fine
dust, or have allergy concerns. Follow the
instructions on the following pages to perform
these simple maintenance steps.
Special On-Board Tools
1.
2.
3.
Tip:
Hair, string and
small objects can
block the Vacuum
Hose or Tools.
Check them
occasionally for
obstructions.
CAUTION:
The Rotating Floor Brush
continues to rotate while tools
are in use. To reduce the risk of
injury from moving parts,
always move the cleaner with
the Carrying Handle at the back
of the cleaner. Always place
vacuum cleaner on floor with
Handle in Upright position
when using tools. Never place
your fingers under the cleaner
when it is running. Never place
Powerfoot on furniture or
uneven surfaces. Do not place
vacuum cleaner close enough
to objects to pull them into
rotating brush.
NOTICE:
The Floor Brush will continue to rotate
while you use your vacuum for above
floor cleaning. To prevent carpet damage,
do not lean on the vacuum or let the
Powerfoot tilt forward.
NOTICE:
While vacuuming, certain carpets
and low humidity conditions may
generate small static discharges.
The discharges are entirely harmless
and are not associated in any way
with the main power supply.
Power Cord Storage
1.
2.
3.
4.
How to Maintain Your BISSELL CleanView
WARNING: To reduce
the risk of electric shock,
turn Power Switch OFF and
disconnect plug from electrical
outlet before performing mainte-
nance or troubleshooting checks.
1.
2.
3.
ug603-5202/3590/220-240v/1/03 7/1/04 11:15 AM Page 7