Bissell 32N3 Vacuum Cleaner User Manual


 
w w w . b i s s e l l . c o m
7
0perations
Special tools continued
Crevice tool:
Use the crevice tool in tight, narrow
spaces.
Dusting brush:
Attach dusting brush to the tip of the
crevice tool to dust furniture, blinds, books,
lamps, shelves and baseboards.
Variable suction power control
The variable suction power control
is located on the top of the vacuum.
Twist the dial control toward MAX
for maximum suction. Twist the dial
control toward MIN to minimize suc-
tion for lightly soiled areas or delicate
fabrics.
High filtration dust bag
The BISSELL PurePro features a non-
woven, high filtration dust bag that
captures more fine dust than traditional
paper dust bags, giving off less dust
emissions. It also holds more fine dust
particles, giving you longer lasting suc-
tion power.
Bag change indicator
The bag change indicator is located
right below where the hose inserts
into the vacuum. If the colour scale
bag change indicator fills the window
while you are vacuuming, the dust bag
needs to be replaced. The dust bag
may appear to be full or only partially
full depending upon the type of debris
picked up. Fine particles can block the
airflow in the dust bag and reduce
suction before the dust bag is full. If
the colour scale bag change indica-
tor remains full, even after changing
the dust bag, turn the vacuum off and
check for a clog in the hose or tools.
Note: The indicator may fill the win-
dow when using the tools due to the
restricted airflow. This does not nec-
essarily mean that the dust bag is
full. If the indicator does not turn off
once the tool is removed, check for a
clog in the hose/tools or replace the
dust bag.
Bag Change
Indicator