Filter
Top Products
4
How to use this guide
How to put it together
This User’s Guide has been designed to help you
get the utmost satisfaction from your BISSELL
EASY VAC
™
Bare Floor and Carpet Vacuum. You’ll
find assembly and operating instructions, safety
precautions, as well as maintenance and
troubleshooting instructions.
Please read this Guide thoroughly before assembling
your vacuum cleaner. Pay particular attention to the
assembly diagram, assembly instructions, and part
names. Locate and organize all parts before assembly.
Familiarize yourself with the parts and where they go.
Following this User’s Guide will greatly enhance your
ability to get the best performance from your BISSELL
EASY VAC
™
for many years.
WARNING:
Do not plug in your
vacuum cleaner until
you have completely
assembled it per the
following instructions
and are familiar with
all instructions and
operating procedures.
Your EASY VAC
™
comes in four, easy to assemble components.
No tools are needed.
Detachable Canister Handle
Lightweight Detachable Canister
Floor Nozzle
Crevice Tool
Attach Upright Handle to Canister Vacuum
Gently slide Handle over square end of Canister Vacuum, pushing until
buttons on Canister snap into place in opening on Handle. The Handle is
designed to attach and disassemble easily as you switch from upright to
canister style cleaning.
Attach Floor Nozzle to Canister Vacuum
Grasp Floor Nozzle with one hand, while holding Canister Vacuum firmly
with the other. With firm, even pressure, press Floor Nozzle into round
opening at end of Canister Vacuum. Continue pressing gently but firmly
until Floor Nozzle can go no further. As with the Upright Handle, the Floor
Nozzle is designed to attach and disassemble easily as you switch from level
floor to tool style cleaning.
Attach Crevice Tool to Tool Clip
Slide narrow end of Crevice Tool over angled post on the side of the
Canister, then press round end of Tool into semi-circular grip located just
below the Quick Release Cord Wrap.
EASY VAC
™
assembly is now complete.
1.
2.
3.