Before you clean
1. Plan activities to give carpet time to dry.
2. Remove easily moved furniture (chairs, lamps,
coffee/cocktail tables, etc.) from room if needed.
3. Vacuum carpet thoroughly.
4. Decide where to begin — and end — your job.
Clean in 3’ X 4’ sections, starting in areas farthest
from exit. Plan to leave a path open to empty
soiled water and refill cleaner.
5. Carpeting will dry in three to four hours, depending
on carpet style and air circulation in room. A floor
fan speeds drying.
6. Replace furniture on damp carpeting by placing
waxed paper under legs until floor dries completely.
Fill the tank
1. Remove the solution tank by lifting it straight up,
then away from the lower body.
2. Unscrew the black cap at the bottom of the
solution tank.
3a. Add one of the BISSELL advanced cleaning
formulas for deep cleaning machines to the for-
mula fill line on the solution tank. Fill the rest of
the tank with hot (not boiling) tap water to the
water fill line. Replace and tighten the black cap.
3b. If using the BISSELL 3X Concentrated Fiber
Cleansing Formula: Add 1/2 capful of 3X
Concentrated Fiber Cleansing formula to clean
water/solution tank, and then fill with hot water to
the line.
4. Place solution tank on lower body.
5. Rotate Quick Release Cord Wrap™ to release the
Power cord and plug into an outlet.
Pre-Treating
Pre-treat stubborn stains and highly soiled
carpet in hallways and other high-traffic areas.
1.
Using BISSELL Tough Stain pre-cleaner, generously
spray evenly over soiled area, do not overwet carpet.
2. Wait 3 -5 minutes before deep cleaning.
Operation
6
www.bissell.com 800.237.7691
Tip:
Always vacuum thoroughly before
you deep clean. If possible, move
large furniture to an area you will
not be cleaning.
WARNING:
To reduce the risk of fire, use
only BISSELL advanced
cleaning formulas for deep
cleaning machines. Use of
cleaning formulas that contain
lemon or pine oil may damage
this appliance and void
warranty. Chemical spot
cleaners or solvent-based soil
removers should not be used.
These products may react with
the plastic materials used in
your QuickSteamer, causing
cracking or pitting.
Tip:
Deep cleaning
spots, spills and
high traffic areas
on a regular basis
can prolong
carpet life.
2.
ug120-4071_1770_908.indd 6 10/14/08 1:06:04 PM