Filter
Top Products
*QuickSteamer PowerBrush models only
1.
Turn the machine off and unplug from wall outlet.
2. Remove Clean/Solution and Collection Tanks.
3. Lie machine down to access the bottom of
the machine.
4. With a Phillips head screwdriver, unscrew the
Brush Cover and remove.
5. Remove the Brush End Cap and remove belt
from brush.
6. Brush can now be removed.
7. Belt can be removed by sliding off the Motor Pulley.
8. Clean or replace belt. Attach belt to Motor pulley
and brush, insert brush into right side End Cap.
9. Reattach the left End Cap and slide brush back
into place.
10. Replace the brush cover and screw into place.
To Install the Replacement Brush Belt
3
9
www.bissell.com 800.237.7691
Brush Cover
4 5
765a
1098
ug603-5603_1770_206.indd 9
ug603-5603_1770_206.indd 9
2/28/06 4:27:44 PM
2/28/06 4:27:44 PM