Filter
Top Products
1.
Storage
Store in a dry area, at room temperature
to avoid freezing.
To replace the powerbrush belt
If the belt should break, to replace:
1. Remove the screw in the belt cover using a
Phillips Screwdriver.
2. Remove the broken belt.
3. Replace the new belt over the 2 belt gears.
4. Replace the belt cover door.
Maintenance and care (continued)
9
w ww.b is se ll .c om 8 00 .2 37 .7 69 1
Tip:
If you do not have the Brush
Cartridge in all the way, the
Dual PowerBrushes will not
rotate. Firmly push the
cartridge in place, while
listening for the “snap” to
assure proper placement.
WARNING:
To reduce the risk of
fire, electric shock or
injury, unplug from outlet
before servicing.
Troubleshooting
Cleaner won’t run
Possible causes Remedies
1. Power cord not plugged in 1. Check electrical plug
2. Blown fuse/tripped breaker 2. Check/replace fuse or reset breaker.
3. C.I.D. needs to be reset 3. Reset C.I.D. (page 5).
Reduced spray or no spray
Possible causes Remedies
1. Spray nozzle clogged 1. Clean spray nozzle
2. Solution tank empty 2. Check/refill tank
3. Tank not inserted properly 3. Make sure tank is inserted properly
Deep cleaner won't pick up cleaning solution
Possible causes Remedies
1. Collection tank is full 1. Empty collection tank
2. Collection tank drain plug is loose 2. Check plug for snug fit