Filter
Top Products
Bissell PowerSteamer® ProHeat™ Series Service Center Repair Guide
Printed February, 2001
1/30/2004 (Revision 1)
4
3. Check seals on Clear Water Tank and Solution Tank. If necessary, re-seat or replace
seals.
4. Check valve action on Clear Water Tank and Solution Tank by depressing them with
your finger. The valve should move up and down. Replace if necessary.
5. Check position and condition of gaskets at nozzle window top and motor duct. Re-seat or
replace if necessary.
6. Check position of tabs (2) at upper rear of nozzle window to ensure they are inserted
properly into their alignment holes. Re-seat if necessary.
7. Remove belt access door at left front of unit (viewed from rear).