Filter
Top Products
9
www.bissell.com 800.237.7691
Machine care
For best results, a few simple steps can assure
your machine is well maintained after your
cleaning is complete.
1. Turn power switch OFF ( 0 ). Unplug the
machine and wrap the power cord.
2. After emptying the 2-in-1 water tank, rinse it out
at a faucet with running hot tap water, taking
care to clean underneath the heavy duty bladder,
and all around it. Clean out lint trap.
3. Replace the 2-in-1 water tank on the machine.
4. Any loose hair or debris can be pulled from
the brush roll if desired and thrown away.
5. Wipe the machine’s exterior with a soft cloth.
6. After carpet is dry, vacuum again to remove
hair and fuzz.
Machine storage
Once your cleaning is complete, make sure the
2-in-1 water tank is emptied and rinsed out. Put
the unit away in a closet or basement for the next use.
Note: Store cleaner in a protected, dry area.
Since this product uses water, it must not be
stored where there is a danger of freezing.
Freezing will damage internal components
and void the warranty.
Maintenance and care
WARNING:
To reduce the risk of fire,
electric shock or injury,
unplug from the outlet
before servicing.
Troubleshooting
Reduced Spray OR No Spray.
Possible cause Remedies
1. Bladder may be empty 1. Turn power off; Refill bladder with clean
hot tap water.
2. The lint screen may be clogged 2. Clean out lint screen.
3. 2-in-1 tank may not be seated properly. 3. Turn power switch OFF; remove tank and
reseat tanks.
4. Pump may have lost prime. 4. Turn power switch OFF; after 1 minute turn
ON and depress spray release trigger.
ug120-4007_1694-8806_507.indd 9ug120-4007_1694-8806_507.indd 9 6/4/07 2:47:47 PM6/4/07 2:47:47 PM