Bissell 1690 Vacuum Cleaner User Manual


 
10
How to clean bare floors
Getting ready
NOTE: Your POWERSTEAMER
TM
is not recommended for
cleaning wood floors.
Use only BISSELL Floor Cleansing Formula
TM
on
no-wax floors. Never use BISSELL Fiber Cleansing
Formula
TM
or other carpet cleaners on bare floors.
Sweep before starting.
Remove old wax before cleaning.
Leave an exit path.
Allow at least 1/2 hour drying time.
1. Remove Clean Water Tank Assembly and Dirty Water
Tank Assembly.
2. Tip POWERSTEAMER
TM
back for easier access to Nozzle.
3. Attach Bare Floor Cleaning Tool to Nozzle with strip facing
forward, as shown. Align front edges and snap together.
4. Tip Handle Assembly back by pressing Release Pedal on left
side of Lower Chassis and pulling back on Handle Assembly.
5. Take Clean Water Tank to sink area, remove Clean Water
Tank Cap and fill Tank with hot (NOT boiling) tap water
to fill line. Replace Cap securely.
6. Remove SmartMix
TM
Formula Tank Assembly from Clean
Water Tank Assembly by grasping bottom with fingers and
sliding it out.
7. Unscrew SmartMix
TM
Formula Tank Cap and Insert
Assembly and add BISSELL Floor Cleansing Formula
TM
to
fill line. Reclose Cap tightly.
8. Slide SmartMix
TM
bottle back into position in Clean Water
Tank Assembly.
9. Replace Clean Water Tank Assembly. Slide Tank down front
of Handle Assembly until it fits snugly against top of Lower
Chassis. Secure with Clean Water Tank Latch Assembly.
10. Replace Dirty Water Tank Assembly.
11. Select SmartClean
TM
setting.
WATER ONLY - Use for gentle cleaning, or for (optional)
rinsing following cleaning.
NORMAL - Water and Floor Cleansing Formula
TM
are
mixed to optimize normal cleaning. Use for everyday
dirt and soil conditions.
HIGH TRAFFIC - Water and Floor Cleansing Formula
TM
are mixed to optimize heavy cleaning. Use for
entryways, hallways, heavy soil and stains. This
setting may require more frequent refilling on the
SmartMix
TM
bottle.
WARNING: U s e
only BISSELL Fiber
Cleansing Formula
i n
your POWERSTEAMER.
Use of cleaning formulas
which contain lemon
or pine oil may damage
this appliance and void
w a r r a n t y. Chemical spot
cleaners or solvent-
based soil removers
should not be used.
These products may
react with the plastic
materials used in your
P O W E R S T E A M E R,
c a u s i n g
cracking or pitting.
Snap Together
3.
Bottom Front Edge of
Lower Chassis
Bare Floor
Cleaning
Tool