Filter
Top Products
5
Your PowerSteamer assembles in two quick steps. The only
tool you will need to assemble your cleaner is a Phillips head
screwdriver.
Your PowerSteamer is packaged as two primary components…
the Lower Body and the Handle Assembly. To assemble:
Slide the Handle Assembly (with attached Quick Release
Cord Wrap™) down into the Lower Body until it will go
no further.
Secure the handle by placing one (1) Phillips head
screw (supplied) through the screw opening in the Lower
Body and into the rear of the Handle Assembly. Tighten
with screwdriver until secure.
Assembly is now complete.
The Power Switch controls power to the machine.
The brush at the Floor Nozzle is designed to enhance cleaning
performance. The bristle pattern lifts out the deep down dirt
while gently grooming carpet fibers. The floating suspension
self-adjusts to all carpet heights.
Your PowerSteamer is equipped with a Measuring Cup for adding the
proper amount of cleaning formula to the Tank-in-Tank. Before using
the machine, simply fill the Measuring Cup to the fill line with BISSELL
Fiber Cleansing Formula. Pour the formula into the Tank-in-Tank as
shown on page 6. For convenience, the Measuring Cup stores on the
back of the unit.
How To Use This Guide
The Basics: How Your PowerSteamer Works
Measuring Cup
1.
2.
Power
DirtLifter Brush
Phillips
Head
Screw
O
F
F
O
N
ON
OFF
Power
Switch
WARNING:
To reduce the risk of fire,
electric shock or injury,
unplug from outlet
before servicing.
Tip:
Deep cleaning
carpeting
regularly can
reduce dust
and allergens in
your home.