Filter
Top Products
Before you clean
1. Plan activities to give your carpet time to dry.
2. Move furniture to another area if cleaning
an entire room (optional).
3. Vacuum area with a dry vacuum cleaner
before deep cleaning.
4. Plan your cleaning route to leave an exit path. It
is best to begin cleaning in the corner farthest
from your exit.
5. Pretreating (optional)
Pretreating is recommended to improve cleaning
effectiveness for heavily soiled carpet in high traffic
areas such as entry ways and hallways.
To pretreat:
A. Using the BISSELL Tough Stain
Pre-cleaner, generously spray evenly
over soiled area, do not overwet.
B. Wait 3-5 minutes before deep cleaning.
C. Clean as normal using your BISSELL deep
cleaner, following the instructions below.
Fill the 2-in-1 water tank
1. Remove the tank from the base of the machine
by lifting the tank carry handle.
2. Carry like a bucket to the sink. Rotate the handle
forward to unlatch the lid. Remove lid, turn over
and locate built in measuring cup.
3. Fill formula to the indicated fill line on the
built in measuring cup and pour into mouth
of the bladder.
If using BISSELL 3X Concentrate
formulas: add one formula capful directly
into the mouth of the bladder.
4. Fill the bladder with clean hot tap water.
*Do not boil or microwave water as it can
destroy the bladder.
7
www.bissell.com 800.237.7691
2
4'
3'
1
3
4
5
6
7
9
10
11
12
EXIT
START
HERE
Operation
1.
2.
4
3.
ug120-4073_1623_908.indd 7 10/14/08 12:59:37 PM