Bionaire BMD100 Dehumidifier User Manual


 
PLEASE READ AND SAVE THESE
IMPORTANT INSTRUCTIONS.
With proper care and use, this Bionaire
dehumidifier will give you fresh, clean air for
many years.
NOTE: Before reading these instructions,
please unfold the back page for the
corresponding illustrations.
DESCRIPTIONS (SEE Figure 1)
This product includes unit with tank,
instruction manual, and adaptor.
A. ON/OFF Switch (see fig,1)
B. LED Display (see fig,2)
C. Power Indicator (see fig,2)
D. Full Indicator (see fig,2)
NOTE
1. This model works within ambient temperature
of 5 ˚C to 35 ˚C.
2. Do not cover the air intake (back) or the air
outlet (top).
3. Empty water reservoir when FULL light
illuminates.
4. In order to avoid danger, the unit must be far
away from heat, explosive gas, plenty of dust
and chemical environment.
SAFETY PRECAUTION
Carefully read and retain all instructions before
using the dehumidifier.
To avoid fire or shock hazard, check that the
voltage on the product corresponds to your
electricity supply and plug directly into an
electrical outlet.
To avoid fire hazard, never put the cord under
rugs, or near any heat source.
Carefully discard any plastic wrapping that
was used for the packaging.
Do not use the dehumidifier outside.
Do not place the unit near any heat source or
in direct sunlight.
Always unplug the dehumidifier before removing
the grill, cleaning the dehumidifier or whenever
it is not in use.
Do not use in or around water or any other
liquids. Do not attempt to wash the unit under
running water.
Use appliance only for intended household use
as described in this manual.
Ensure that all air openings are not restricted
or covered in any way.
Do not place anything on top of the unit.
Never insert any object into any openings.
Do not use the dehumidifier if any part is
missing or damaged in any way.
Do not attempt to repair or adjust any mechanical
functions of this unit. If the unit becomes damaged
return to the place of purchase or phone the
helpline number on the back of this leaflet.
The appliance intended only for indoor use
If the supply cord is damaged, it must be
replaced by the manufacturer or its service
agent or a similarly qualified person.
In the event of a momentary electrical
disturbance , the sample may malfunction and
require user to reset the sample.
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the appliance by
a person responsible for their safety. Children
should be supervised to ensure that they do
not play with the appliance.
HOW THE MINI HUMIDIFIER WORKS
Your Bionaire™ Mini dehumidifier draws
moisture laden air through the intake grill on the
back of the appliance. Humidity passes through
refrigerated coils where the moisture is removed
and collected in the water reservoir.
PRE-OPERATING INSTRUCTIONS
1. Select a location for your dehumidifier, on a
flat/level surface, about 10 cm away from the wall.
2. For 120 volt countries :
Plug the power cord into a 110-120V AC
electrical outlet.
For 220 volt countries:
Plug the power cord into a 220-240 AC
electrical outlet.
OPERATING INSTRUCTIONS
1. Please use provided AC Adaptor for
power supply.
2. Insert the adaptor's output plug into input
socket of the unit.
3. Switch the unit "On" and a green light on the
LED display will illuminate.
4. The product will work with auto control mode
after it is on.
5. When the tank is full of water a red light in
the LED will illuminate indicating that the
tank is full.
6. Remove tank and lift cover to pour water
out Return tank to its original position to
resume work.
ENGLISH
2
3
Trouble Shooting
Trouble
•Green light in LED display is
not illuminated.
•Red light in LED display is
illuminated.
Probable Cause
Unit not plugged in.
Power failure.
Tank is not correctly placed.
Solution
Plug unit in.
Check fuse or outlet.
Follow emptying instruction in
this manual.
Make sure tank is seated in the
appliance correctly.