Filter
Top Products
3.5 Stop for manual cutting can be switched off
Deselecting of the scissor symbol, will disengage the stop sequence for manual
cutting at the beginning of a design or color.
3.6 Manual “tie on” for embroidery
Disabling of the “tie on” button will disengage the automatic tie on.
User brings up the lower thread manually and during the first stitches the thread
must be held.
Attention: If “tie on” is deactivated, the setting for jump stitches will be ignored and the cutting
of jump stitches is NOT possible.
When the machine is turned off it returns to “activated”.
12/14, 04.11.2009