Filter
Top Products
Owner's Manual 19
ENGLISH
A/CL
2
3
4
1
To raise the temperature
To lower the temperature
A/CL
HEATER
Operating Instructions
Electric Heater Operation Mode(Heat pump & Electric heater product only)
Press the Start/Stop Button.
Select heating Operation by pressing the Opertion Mode Selection button.
Press the Heater Operation Button on the remote controller.
Set the temperature upper than the room temperature.
The temperature can be set within a range of 16°C~30°C by 1°C.
Set the Fan Speed.
❑ Each time the Button is pressed, the
Fan Speed mode is shifted.