Filter
Top Products
4
Safety PrecautionsOperating InstructionsCare and MaintenanceTroubleshooting Tips
Signal
receptor
Operation indication lamps
Preparation before operation
Storage and Tips For Using the Remote Control
• Theremotecontrolmaybestoredmountedona
wall.
• To operate the room air conditioner, aim the
remote control at the signal receptor.
How to Insert the Batteries
Remove the battery cover by pulling it according to the
arrow direction.
Insert new batteries making sure that the (+) and (-) of
battery are installed correctly.
Reattach the cover by sliding it back into position.
NOTES:
• Use 2 AAA(1.5volt) batteries. Do not use rechargeable
batteries.
Signal Receptor
Receives the signals from the remote controller.
(Signal receiving sound:two short beeps or one long beep.)
Operation Indication Lamps
On/Off : Lights up during the system operation.
OFF Timer :Lights up during indoor unit operation.
Defrost Mode: Lights up during Defrost Mode or Hot Start operation.
(Heat pump model only)
ON
Indoor Unit
Operation
:Lights up during indoor unit operation.