Filter
Top Products
Operating Instructions
Owner’s Manual 7
ENGLISH
Signal
receptor
Operation indication lamps
OperatingInstructions
Remove the battery cover by pulling it according to
the arrow direction.
Insert new batteries making sure that the (+) and (-)
of battery are installed correctly.
Reattach the cover by sliding it back into position.
: Use 2 AAA(1.5volt) batteries.
Do not use rechargeable batteries.
NOTICE
• The remote control may be stored by mounting it on a
wall.
• To operate the room air conditioner, aim the remote
control at the signal receptor.
Signal Receptor
Receives the signals from the remote control.(Signal receiving sound: two short beeps or one long beep.)
Operation Indication Lamps
On/Off : Lights up during the system operation.
SleepMode:LightsupduringSleepModeAutooperation.
Timer : Lights up during Timer operation.
Defrost Mode : Lights up during Defrost Mode or Hot
Start operation (Heat pump model only)
: Lights up during outdoor unit operation.
(Coolingmodelonly)
OUT
DOOR
OUTDOOR UNIT
OPERATION
StorageandTipsForUsingtheRemoteControl
Remote Controller
Lights up during Sleep Mode Auto operation.
PLASMA
Plasma : Lights up during plasma operation (Plasma model only)
88
:Indicatesthesettingtemperature
(Plasma model only)
ON
INDOOR UNIT
OPERATION
:Lights up during indoor unit operation.(Optional)