Filter
Top Products
11
Taking off the exhaust cover and
exhaust filters
On every fifth change of dust bag,
with the change of motor protec-
tion filter; open the exhaust cover
at the back where the air gets out
of your product, by pushing on
the pin as shown in the picture in
order to take the hepa filter and
sponge filter located inside. Wash the hepa filter and the spon-
ge filter in warm water and leave
them to dry for 24 hours.
Attention! Do not use devices such
as hair dryers or stoves which give
hot air out in order to dry.
Do not insert the hepa filter and
sponge into their places befo-
re they are completely dried,
otherwise humidity odour may be
delivered, water splash may occur
at the backside and filters may be
harmed.
Hepa filter
Sponge filter