Filter
Top Products
8
How to use the parquet, carpet
brush
There is a control mechanism on
the left side of the parquet carpet
brush. By the help of this control
mechanism the brush is brought
into the desired conditions suitable
for the surface to be cleaned.
a. In order to clean the rugs and
the carpets, use your brush in
normal condition. (Hair brushes
are hidden.)
b. In order to clean hard floor
coverings such as parquet, vinyl
floor covering, linoleum and flat
surfaces such as walls without
scrating, change the position of
the control mechanism and clean
on the hair brushes.
Warning: The carpet brush may
stick to your carpet closely since
the vacuum power of your vacuum
cleaner is very high. For this rea-
son it may cause exhausting arm
and back aches. In order not to
face such a problem, reduce the
vacuum power of the product.
Turning off and parking
The operation of the vacuum cle-
aner is stopped by pushing on the
on-off button with power variator
located on the body.
Do not unplug it immedeately in
order to stop the operation of
your product, first push the on-off
button with power variator to stop
the operation of the product.
You can park
your vacuum
cleaner in two
different ways:
vertical and
horizantal. You
can attach the
brushes
parking place
in to the
parking socket at the back of the
product in order to park vertically.