Filter
Top Products
4
Parking the Appliance
(Picture 7)
(Picture 8)
(Picture 9)
(Picture 10)
6
Switch off the vacuum cleaner by
pressing the on/off button on the housing
(Picture 7).
Plug off the cord, and press the cord
winder key on your appliance in order to
wind back the cord into its socket (Picture
8).
You can keep your vacuum cleaner by
fitting the snap on the brush into its socket
on the appliance (Pictures 9-10).
Attention!
Do not carry your appliance when it
is in the parking position.
Using your machine
5
FUNCTION
LIGHT
INDICATOR
SHOWING
THE
FULLNESS OF
THE DUST
BAG
In the cases when paper filter is full while the appliance is
operating at the max. power level, and/or when the engine
protection filter and the sponge become dirty, the light indicator
warns by lighting itself continuously (Picture 6). In this case,
stop the vacuum cleaner by pressing the on/off button. Do the
maintenance and cleaning. (See: Maintenance and cleaning)
Attention!
Although the paper filter may seem to be empty, as the particles
from the cleaned surfaces will have clogged the pores of the
paper filter, the light indicator will be on. In this case, a new paper
filter should be fitted in. (See: Maintenance and cleaning)
HOW IT WORKS
(Picture 6)
fullness of the
dust bag
4) Operating:
When you press the on/off button, the
engine will start operating.
Attention!
Do not press the buttons of the
appliance with your foot. The
defects caused by doing so are not
covered within the gurantee.