Filter
Top Products
1
Technical Aspects of your machine
Vacuuming mouth
Spare paper filter lid
Dust lid
Light indicator
On-off button
Cord winder button
Electrical cord
Vacuuming adaptor
Hose
Pipe adaptor
Telescopic tube
Brush for carpets
and hard surfaces
Narrow tool
Adjustment bolt
2
3
4
Net weight : 6.15 kg.
Adapter Voltage / Frequency
: 220-240V~ 50/60 Hz
Adapter Isolation Class
:
Dimensions : ø 405 x 325 x 245 mm.
Maximum power : 2200 W max.
Nominal power : 1700 W nominal
Using your machine
5
6
7
8
9
10
11
12
13
All declared values on the product and on the printed
leaflets are picked up after laboratory measurements
performed according to related standarts. These values
may differ upon usage and ambient conditions.
3 4
9
10
13
8
2
4567
3 1
1) Preparing the vacuum cleaner
for use:
Press the key on the vacuuming adaptor
(Picture 1), and fit the hose holding piece
into the vacuuming mouth. Pull the cord
out and plug it in the electric socket
(Picture 2).
Attention!
Do not pull out longer than the red
indicator on the cord.
2) Using the telescopic pipe:
The pipes are telescoped and the length
can be adjustable. By pressing the
adjustment bolt forward, adjust the length
of the pipe for your convenience (Picture
3). When you release the adjustment
bolt, the pipe will remain fixed at its place.
Fix the accesory that you want to use at
the end of the telescopic pipe.
Fix the accesory that you will select
according to the surface you will clean
at the end of the telescopic pipe (Pictures
4,5).
3) Using the accesories:
The narrow-mouthed end piece is used
to clean places which are narrow and
difficult to reach.
The use of the brush for carpets and
hard surfaces: There is an adjusting
mechanism on the left side of the brush,
which indicates a positioning for carpets
and for hard surfaces. This mechanism
is adjusted according to the surface to
be cleaned. To clean your carpets and
kilims, use the brush in the normal
position (the bristle-brushes in a hidden
position). To clean hard surfaces such
as wooden or vinyl, or flat surfaces such
as the walls, change the adjustment
positioning and do the cleaning on the
bristle brushes.
(Picture 1) (Picture 2)
(Picture 4)
(Picture 5)
(Picture 3)
adjusting
bolt
14
11
14
12
The power values were tested at 240 V.