Beko BK 2600 and BK 3500 Air Conditioner User Manual


 







1RWLFHVIRUXVH
:RUNLQJSULQFLSOHDQGVSHFLDOIXQFWLRQVIRUFRROLQJ
3ULQFLSOH
$QWLIUHH]LQJIXQFWLRQ
:RUNLQJSULQFLSOHDQGVSHFLDOIXQFWLRQVIRUKHDWLQJ
3ULQFLSOH
'HIURVWLQJ
Air conditioner absorbs heat in the room and transmit to outdoor and discharged, so that
indoor ambient temperature decreased, its cooling capacity will increase or decrease by
outdoor ambient temperature.
If the unit is running in COOL mode and in low termperature, there will be frost formed on
the heat exchanger, when indoor heat exchanger temperature decreased below 0 , the
indoor unit microcomputer will stop compressor running and protect the unit.
ć
Air conditioner absorbs heat from outdoor and transmits to indoor, in this way to increase
room temperature. This is the heat pump heating principle, its heating capacity will be
reduced due to outdoor temperature decrease.
If outdoor temperature becomes very low, please operate with other heating equipments.
When out frost will
form on outdoor unit, that will effect the heating effect, at this time, the auto defrosting
function will act, the heat running will stop for 8-10mins.
During the auto defrosting, the fan motors of indoor unit and outdoor unit will stop.
During the defrosting, the indoor indicator flashes, the outdoor unit may emit vapor.
This is due to the defrosting, it isn't malfunction.
After defrosting finished,the heating will recover automatically.
3
door temperature is low but high humidity, after a long while running,
The climate type of this unit is according to the nameplate.
The external static pressures at which the appliance was tested should be zero Pa.