Filter
Top Products
4
User Instructions
Connect the hot and cold supply hoses to the
supplies with 3/8” compression fittings. Use two
wrenches, as shown in the diagram. Do not allow
the hot and cold supply hoses to twist. Tighten the
hoses wrench tight.
Install the hose weight on the handspray hose. Check
the action of the hose -- it should extend and retract
smoothly. Reposition the weight if necessary.
The spout swivels 360
o
. Do not allow the spout to
swivel more than 360
o
or damage to the hose will
result.