Filter
Top Products
3
Installation
Place the faucet and sealing ring on the mounting
surface.
If the mounting surface thickness is 1 3/8” or less, in-
stall the plastic washer, friction washer, metal washer
and mounting nut. Tighten the mounting nut. Tighten
the tensioning screws.
If the mounting surface is 1 3/8” - 2 3/8”, or if there
is insufficient space, omit the plastic washer.
Connect the handspray hose to the connection hose
with the compression nut, cone washer, brass washer
and seal. Tighten wrench tight. Do not allow the
handspray hose or the supply hose to twist.
plastic washer