![](http://pdfasset.owneriq.net/b/64/b643c11d-a454-4a2b-b81a-620aaffe1630/b643c11d-a454-4a2b-b81a-620aaffe1630-bg4.png)
4
The spout swivels 140
o
. If you want the spout to
swivel a full 360
o
, remove the stop pin before install-
ing the spout.
Push the spout straight down into the faucet body.
Tighten the set screw.
Connect the hot and cold supply hoses to the stops
with 3/8” compression fittings (not included). Tighten
wrench tight. Do not allow the hoses to twist.
Turn on the water and check all connections for leaks.
4
5