Filter
Top Products
2
Uno
2
Two-handle Sink Faucet
38840XX1
Technical Specification
Flow rate 2.2 gpm
Max. incoming water pressure 145 psi
Recommended incoming water pressure 14.5 - 72 psi
Max. incoming hot water temp 176
o
F*
Recommended incoming hot water temp 120
o
F - 140
o
F*
Hole size in mounting surface 1 1/4”
Maximum mounting surface thickness 2 3/8”
Maximum mounting surface thickness with extension 2 7/8”
*know and follow all applicable local plumbing codes when setting the temperature on the water heater.
Installation Considerations
Be sure that you have all tools and supplies neces-
sary before beginning the installation.
The supply hoses on this faucet require supply
stops with 3/8” compression fittings (not includ-
ed).
The spout is convertible. Normally, it will swivel
140
o
. If the spout stop pin is removed before
installation of the spout, it will swivel a full 360
o
.
(see step 4 of the installation instructions)
Installer - please leave this booklet for the hom-
eowner as it contains important information about
the faucet.