Filter
Top Products
3
Installation
Install the friction washer and fiber washer on the valve.
Push the valve up through the hole in the mounting surface.
Install the sealing ring, escutcheon, and nut.
Rest the valve assembly on the mounting surface (1).
Tighten the screws (2).
Push the handles into place (3).
Push the spout shank up through the mounting surface
(1).
Install the sealing ring, escutcheon, and shaft fastening
ring (2).
The notch on the shaft fastening ring and the notch
on the shank must face away from the basin.
Install the fiber washer, friction washer, and mounting
nut (3). Tighten the mounting nut.
1
2
3
2
1
3