Axor 34213XX1 Indoor Furnishings User Manual


 
2
Installation Considerations
For best results, Hansgrohe recommends that this unit be installed by a licensed, professional
plumber.
Please read over these instructions thoroughly before beginning installation. Make sure that
you have all tools and supplies needed to complete the installation.
This faucet can be used with a continuous flow water heater if the flow pressure is at least 20
psi. For best service, the hot and cold supplies should be at equal pressure.
This faucet requires 1/2" supply lines (not included).
Technical Information
Recommended water pressure 14.7 - 72.5 psi
Max. water pressure 145 psi
Recommended hot water temp. 120� - 140� F*
Max. hot water temp 165�F*
Hole size in mounting surface
valves 1-1/4"
spout 1 3/8"
Max. mounting surface depth 1 3/8"
Flow rate 2.2 gpm
*Please know and follow all applicable local plumbing codes when setting the temperature on the water heater.
Axor Citterio M widespread lavatory faucet 34133XX1
Axor Citterio M widespread bidet faucet 34213XX1
34133XX134213XX1