![](http://pdfasset.owneriq.net/f/f9/ff90bf7e-7d1f-437a-8fc3-c8ffad189a8f/ff90bf7e-7d1f-437a-8fc3-c8ffad189a8f-bg4.png)
4
Place the spout assembly with sealing ring on the mount-
ing surface. Install the fiber washer, metal washer, and
mounting nut.
Make sure that the spout assembly stands straight.
Tighten the tensioning screws.
Use the 3/8" compression fittings to install the connec-
tion hoses to the valve outlets.
Connect the valves to the angle stops with ½" supply
lines (not included).