Filter
Top Products
2
Installation Considerations
For best results, Hansgrohe
recommends that this unit be
installed by a licensed, profes-
sional plumber.
Please read over these instruc-
tions thoroughly before begin-
ning installation. Make sure that
you have all tools and supplies
needed to complete the instal-
lation.
•
•
Technical Information
Recommended water pressure 14.7 - 72.5 psi
Max. water pressure 145 psi
Recommended hot water temp. 120° - 140° F*
Max. hot water temp 165°F*
Hole size in mounting surface 1 1/4" valves
1 3/8" spout
Max. mounting surface depth 1 3/8"
Flow rate 1.5 gpm
Requires ½" supply lines (not included)
*Please know and follow all applicable local plumbing codes when setting
the temperature on the water heater.
Axor Starck Widespread Lavatory Faucet
10135XX1