Filter
Top Products
Chapter 2 Installation
P116T Stackable Switch Installation Guide 11
Diagnostics
Tables 2 and 3 explain the meaning of the P116T Stackable Switch diagnostic LED
indicators.
Figure 4 The P116T Stackable Switch Front Panel LEDs and Buttons
1234
5678
9
13
10
14
11
15 16
12
Table 2 Meaning of the P116T Stackable Switch Front Panel Buttons
Button
F
unction Meaning
Select The buttons determine what function will be displayed by the 16
Port LEDs (the top two rows of LEDs).
The seven Function LEDs (above the Select buttons) show which
function is currently displayed by the Port LEDs. The Port LEDs can
display either Link, Collision, Transmit, Receive, Full Duplex, Flow
Control or 100 M status
If, for example, the Link (LNK) LED is lit then LEDs 1 to 16 will
display the Link status of every port.
Press the left or right button to toggle the Port LED display between
functions
Reset Press and hold both buttons simultaneously for a second or more to
reset the entire P110 stack. Upon Reset, all LED indicators turn on.
Pressing Reset does not affect configuration settings.