Filter
Top Products
ZC Kit – Large Pellet Insert
(99200149)
Page 6 of 8 10/9/06 © Travis Industries, Inc.
ZC Can Construction
Construct the zc can as shown below.
WARNING: The sheet metal edges are sharp. Use gloves when handling the zc can.
Top of ZC Can
Knock-out for top
vent applications
Use the included screws to
secure the zc can sides and
top to the zc can rear panel.
Rear Vent Shield (not required for top-vent applications)
A knock-out is provided on the rear panel
for rear vent applications.
Bend the mounting flange as shown.
Bend the top stand-off as
shown and secure it to the zc
can with the included screws.