Filter
Top Products
128-7406
3 of 16
Page 3
(d) You can select Icon Mode or Text mode
(e) You can select Language of text from English, Spanish or French
(f) Set the temperature readout to display in "Fahrenheit or Celsius
(Available on certain model remote start units)
(g) Set the melody for the Alarm Clock
(h) You can set the unit to provide a Tone, or Vibrate upon activation
(i) You can set the Countdown Timer
(j) You can set the Alarm Clock
(k) You can set the Clock
Your transmitter has a battery indicator that is shown in the upper right
corner of the screen as shown below. This icon indicates a new
battery shown with 3 bars. As the battery deteriorates, the bars will
disappear. 1 bar indicates the battery should be replaced. Replace battery
with a fresh 1.5V AAA battery and dispose of the used battery properly.
Other icons that will be displayed at times when certain functions and
features are active in the vehicle or on the remote:
Range Indicator. The range indicator will have bars to the side of the
icon if the unit is out of range.
Vibrate Mode On, this icon will be displayed if you select vibrate
instead of tones. Locate vibrate/tone select in the transmitter program
section and set for vibrate.
Alarm Clock. This icon will be toggled on and off when the "F" +
Trunk/Key buttons are pressed simultaneously. The feature must be
set in the feature selection menu of the transmitter.
Count Down Timer . This icon is toggled on and off by pressing the "F"
+ Option buttons simultaneously. The feature must be set for a time in
the feature selection menu of the transmitter.
Parking Meter Count Down Timer.
The transmitter has a built in timer that can count down from 10, 20, 30,
60, 90, or 120 minutes. This feature is useful when parking the vehicle in a
metered parking lot. If the time on the parking meter is 30 minutes, you
can set the count down timer to 20 minutes. The transmitter will emit a
beep tone when the timer expires to remind you to get back to your vehicle.
To use the parking meter timer, Press the "F" + Option buttons more than
one time. Once activated the Count Down Timer as described above.
Activating the "F" + Option a second time will set the parking meter count
down to 10 minutes, a third time will set it to 20 minutes, a fourth time will
set it to 30 minutes, etc... up to 120 minutes, then the cycle will repeat,
countdown activation, 10 minutes, 20 minutes and so on. Once you stop
at a setting, the unit will count down and when it reaches the set time will
alert you with a beep tone as a reminder that you have to get back to the
vehicle.