Filter
Top Products
128-7406
2 of 16
Page 2
YOUR “ Code Hopping “ TRANSMITTERS
The transmitters included with your new security system use the most ad-
vanced and secure form of radio frequency transmission available on any
current automotive security system. Some of today’s sophisticated auto
thieves use a device known as a code grabber, which will receive and store
the signal from your keychain transmitter, and retransmit at a later time to
disarm your system.
Your anti code hopping transmitters will change their signal every time the
button is pressed, so when a thief grabs then retransmits your signal, the
alarm system
will not
respond.
If your transmitter button is pressed more than fifty times while it is out of
range of the vehicle ( children playing with your keys ), the transmitter will
not operate when you return to the vehicle and will need to be realigned to
the receiver. To do this, simply press the lock button two times within a one
second time period. The system will now respond to that transmitter each
time a button is pressed.
NOTE: Your system has the option of using a siren, the vehicle horn, or both
for the sounding device. Where the siren is referenced below, the
horn or both may in fact chirp, or beep.
Your System is also packaged with a two way confirming transmitter
shown left which can be set for Icon mode or text mode to
indicate the function and status of your vehicle.
To change modes, press and hold the "F" button for 5
seconds. This puts the transmitter into the program mode.
The program modes lets you make selections by pressing
the Trunk/Key Icon button to scroll up, or the Option button
to scroll down. Once you come to the selection of choice,
press the "F" button to select the option, and then use the
Trunk/Key, Option, or lock/unlock buttons to toggle between
choices.
Example: To change between text or icon modes, do the
following:
1) Press the "F" button for 5 seconds until the transmitter
beeps.
2) Press the Trunk/Key button until Homepage Select Set appears.
3) Press "F" to display the selections of text or icons.
4) Use the Trunk/Key or Option buttons to toggle between text or icon
modes.
5) Use the "F" key to select.
6) Press the "F" button for 5 seconds to exit the program mode.
Other features that are selectable or programmable on your two way
transmitter are:
(a) Alarm Trigger History (Will display the last 4 trigger events)
(b) You can assign a Name for a output channel function
(c) You can personalize the Homepage to display name, or have the digital
clock displayed