Ask Proxima DP1000X Indoor Furnishings User Manual


 
ASK Proxima Lamp Information Guide
DP8200x
3200 2000 Hours
Press the Menu button and choose About. If the
maximum lamp time of 2000 hours is exceeded, the
lamp will not light. The lamp must be replaced and the
lamp timer reset before the projector will operate.
Press the Menu Button, choose Setup, then choose
Service, then Lamp Reset. At 2000 hours, the lamp
will not light (Lamp Error LED will be On). You must
press and hold the "Volume -" button and then press
the "Volume +" button within three seconds. LED on
keypad will reset, and you can power the lamp on.
DP8300
3500 2000 Hours
Press the Menu button and choose About. If the
maximum lamp time of 2000 hours is exceeded, the
lamp will not light. The lamp must be replaced and the
lamp timer reset before the projector will operate.
Press the Menu Button, choose Settings, then
choose Service, then Lamp Reset. At 2000 hours,
the lamp will not light (Lamp Error LED will be On).
You must press and hold the "Volume -" button and
the "Volume +" button simultaneously for ten
seconds, then release. Power LED on keypad will
reset to green, and you can power the lamp on.
DP8400
4500 2000 Hours
Press the Menu button and choose About. If the
maximum lamp time of 2000 hours is exceeded, the
lamp will not light. The lamp must be replaced and the
lamp timer reset before the projector will operate.
Press the Menu Button, choose Settings, then
choose Service, then Lamp Reset. At 2000 hours,
the lamp will not light (Lamp Error LED will be On).
You must press and hold the "Volume -" button and
the "Volume +" button simultaneously for ten
seconds, then release. Power LED on keypad will
reset to green, and you can power the lamp on.
DP9100
300 700 Hours
Press the Menu button, choose Projector, then choose
"Lamp Hours". The number of hours used will be
displayed.
Press the Menu button, choose Projector, then
choose the Reset button under the Lamp Hours
menu.
DP9200
500 2000 Hours
Press and Hold the Up Arrow Button on the Keypad for
40+ seconds. The displayed Data value will be the
hours remaining on the lamp.
Press the Menu Button, choose Setting, then choose
"Lamp Age" and select. You will be asked to confirm
the reset.
DP9210
600 2000 Hours
Press and Hold the Up Arrow Button on the Keypad for
40+ seconds. The displayed Data value will be the
hours remaining on the lamp.
Press the Menu Button, choose Setting, then choose
"Lamp Age" and select. You will be asked to confirm
the reset.
DP9240
1600 1500 Hours
Press and Hold the Up Arrow Button on the Keypad for
40+ seconds. The displayed Data value will be the
hours used on the lamp.
Press the Menu Button, choose Setting, then choose
"Lamp Age" and select. You will be asked to confirm
the reset.
Copyright InFocus Corp. 7 7/13/2004