Ask Proxima DP1000X Indoor Furnishings User Manual


 
ASK Proxima Lamp Information Guide
C440
3500 2000 Hours
Press the Menu button and choose About. If the
maximum lamp time of 2000 hours is exceeded, the
lamp will not light. The lamp must be replaced and the
lamp timer reset before the projector will operate.
Press the Menu Button, choose Settings, then
choose Service, then Lamp Reset. At 2000 hours,
the lamp will not light (Lamp Error LED will be On).
You must press and hold the "Volume -" button and
the "Volume +" button simultaneously for ten
seconds, then release. Power LED on keypad will
reset to green, and you can power the lamp on.
C450
4500 2000 Hours
Press the Menu button and choose About. If the
maximum lamp time of 2000 hours is exceeded, the
lamp will not light. The lamp must be replaced and the
lamp timer reset before the projector will operate.
Press the Menu Button, choose Settings, then
choose Service, then Lamp Reset. At 2000 hours,
the lamp will not light (Lamp Error LED will be On).
You must press and hold the "Volume -" button and
the "Volume +" button simultaneously for ten
seconds, then release. Power LED on keypad will
reset to green, and you can power the lamp on.
DP1000x
1100 3000 Hours
Press Menu Button, choose Setup, then choose
Service, then Info. At 2900 hours the Lamp LED lights.
Press Menu Button, choose Setup, then choose
Service, then Reset Lamptimer. Press Select button
again to confirm reset. This will turn off the Lamp
LED also.
DP1200x
1100 2000 Hours
Press the Menu Button, then choose About. If the
maximum lamp time of 2000 hours is exceeded, the
lamp will not light. The lamp must be replaced and the
lamp timer reset before the projector will operate.
Press the Menu Button, choose Settings, then
choose Service, then Lamp Reset. If reached 2000
hour life, Press and Hold the "Volume+" button and
then Press the "Volume -" button and hold for ten
seconds to reset.
DP2000s
1000 2000 Hours
Press the Menu button and choose About. If the
maximum lamp time of 2000 hours is exceeded, the
lamp will not light. The lamp must be replaced and the
lamp timer reset before the projector will operate.
Press the Menu Button, choose Settings, then
choose Service, then Lamp Reset. If reached 2000
hour life, must Press and Hold the "Volume+" button
and then Press the "Volume -" button to reset.
DP2000x
1300 2000 Hours
Press the Menu button and choose About. If the
maximum lamp time of 2000 hours is exceeded, the
lamp will not light. The lamp must be replaced and the
lamp timer reset before the projector will operate.
Press the Menu Button, choose Settings, then
choose Service, then Lamp Reset. If reached 2000
hour life, must Press and Hold the "Volume+" button
and then Press the "Volume -" button to reset.
DP2300
45 40 Hours N/A N/A
DP2400
90 40 Hours N/A N/A
Copyright InFocus Corp. 2 7/13/2004