Filter
Top Products
Service Reference Manual ACCESSORIES
7-11
SRM-HW/HWC 8/99
The louver will fit directly against the front of the unit. However, the lower
lip of the unit will protrude into the louver. The louver must be positioned
to accommodate the protruding lower lip.
The louver must be caulk sealed on all four sides and field-supplied
flashing should be installed across the bottom of the louver. This will
prevent water runoff directly onto the finish wall.
FIGURE 7-3 ALVR Architectural Aluminum Extended Louver
13.831"
13.831"
28.875"
1.225"
Ty p.
.500" x .375" x 28.875"
Polyether Gasket
1.225"
Ty p.
.775"
Ty p.
45.000"
Gasket