Filter
Top Products
5-14
UNIT COMPONENTS Magic-Pak: HW/HWC
SRM-HW/HWC 2/99
Induced Draft Blower (*63)
The induced draft blower is also referred to as a “combustion” blower,
since its purpose is to establish flow of combustion air through the heat
exchanger. Mounted at the outlet of the secondary heat exchanger, the
blower establishes a negative pressure within the heat exchanger and
exhausts the flue products outside the structure.
Blower motors operate at a fixed speed.
.32 Extension Barbed Tube
for .096 (+/ .005 ) I.D.
Pressure Tap
"
"
"
FIGURE 5-9 Magnetek JBIMI37NS Induced Draft Blower
Induced Draft Blower Specifications
Manufacturer: Magnetek
Model: JBIMI37NS
Armstrong P/N 41144-001
208/240VAC, 60 Hz, Single Phase, .55 FLA, 3000 RPM, .031 HP
Rotation CW LE
Continuous Duty
Features: Ball Bearing; Stainless Steel Shaft;
Motor Grounded to Blower Housing